Setup Rode Wireless Go II for Zoom

Please be sure at least one Rode Mic is fully charged.

Turn on your Rode Receiver and one of the Rode Microphones. It may look something like this:


Take one of your USB-C to USB-A cords (provide with your Rode Wireless Go II kit) and plug the USB-C to the receiver and the USB-A to your laptop (or hub).

If you have a USB-C to USB-C, you should be able to use this cord as well! This is NOT included in the Rode kit.


If you are using a lavalier, please connect your RODE Lavalier GO Professional-Grade Wearable Microphone to your Rode Mic.


On your computer, open your Zoom App (if not already) and start a call. In the lower left corner, you should click the Microphone Icon (^). If you are not connected to your Wireless GO II, simply click to change!

If you are using an alternative speaker than your device (i.e. wireless earbuds), simply change the output (Speaker) to your preferred audio source.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.